Skip to main content

Resolved | Windows Server 2008 R2 SP1 Update Fails

Issue: Windows Server 2008 R2 SP1 Installation fails

Environment: Windows Server 2008 R2 Operating System OS

Solution:

1) Open Windows Explorer and navigate to C:\Windows\Inf folder

2) Cut and Paste following files starting with name USB in another safe location:
image
3) Install the SP1 Update

4) After successful installation, place those files back.

Comment if this solution works for you.

Comments

Popular posts from this blog

Windows Server 2008 R2 always boots in recovery mode

If you are facing below Issues :
- You faced the Windows Server 2008 R2 Clean boot issue
- Windows Server 2008 R2 starts in recovery mode
- After installing windows updates on Windows server 2008 R2 system goes in recovery mode after reboot
- Safe mode also doesn't work in above case and get stuck at classpnp.sys

Then this is the solution for all above:

1. Boot into Windows Recovery Mode
2. Open Command Prompt
3. Type:

sfc /SCANNOW /OFFBOOTDIR=C:\  /OFFWINDIR=C:\Windows

4. Goto following location :

C:\Windows\winsxs\
Check out for pending.xml file.
If it is present, then DELETE it.

5. Reboot the system.

6. Select normal boot mode. 

You have done it!